Menü
Foundation Construction Train
Track Foundations with HERING

Foundation Construction Train

New and special civil-engineering technology for railway construction

Highest track availability and short shut-down times, challenging geographies and confined spaces demand know-how, experience and high-performance as well as approved special civil-engineering technology for railway construction. That’s why we joined forces with Kirow Ardelt, the global market leader for railway cranes, and RTG Rammtechnik (BAUER Maschinen Group), the specialist for vibration, pile-driving and pressing, to develop a high-performance track-foundation laying train. With special set-up procedures and tool logistics as well as high foundation-laying performances, quality and speed, the rail-mounted carrier adapts special civil engineering processes that are employed in the field of railway construction and guarantees the sustainable, safe and cost-effective fulfilment of your requirements.

Track foundations with equipment by HERING

  • Vibration-free drilling of holes with diameters of up to 1350 mm
  • MR 105 V (SilentVibro) vibrator for the high-frequency vibrating of sheet-piling profiles of lengths of up to 15 metres
  • HRS 5 hydraulic hammer for pile driving lengths of up to 12,20 metres
  • MPU 660 sheet-piling press or MPZ for pressing sheet pilings, Z-profiles, U-profiles and light profiles of up to 15 metres in length
Vorschaubild YouTube Video
Foundation Construction Train: The Revolution!

FIELDS OF APPLICATION – WITHOUT CONSTRUCTION ROAD

  • Realisation of bored piles using the Kelly drilling method for overhead line masts, signal brackets, noise barriers, etc.
  • Vibrating / pressing of sheet piling for securing excavations and stabilising railway embankments as well as installing girders for Berlin shoring, etc.
  • Driving in of concrete piling and casing pipes using the HRS5 hydraulic hammer
  • Installation of vibro-replacement stone columns for ground improvements in or near tracks (VIPAC method)
     

PERSPECTIVELY:

  • Production of bored piles using the rigid-cast-in-place method
  • Boring of cased and overlapping piles for bridge foundations and overlapping bored pile walls (front-of-wall method)
  • Realisation of single columns / diaphragm walls using the cutter-soil-mixing (CSM) and CSM DH methods as ground-improvement measures
  • Down-the-hole (DTH) hammer for drilling in rock

 

Foundation Construction Train - details:

  • Rail-mounted carrier equipment
  • Leader for use with special civil-engineering tools (vibrator, sheet-piling press, hydraulic hammer, kelly drilling equipment, etc.)
  • Comprehensive system consisting of a carrier unit, flat-bed carriage for storing the leader and additional flat-bed carriage for transporting and setting up attachments
  • Extends up to 9,50 metres from the track axis
  • Use in superelevations of up to 160 mm
  • Hydraulic rams for support distances of up to four metres from the track axis
  • 360° swivelling around the upper carriage axis
  • Operation that keeps the opposite track free: maximum protrusion of upper carriage from the track axis is 1.55 metres
  • High foundation-laying performances, quality and speed

Heavy duty machinery and Foundation Construction Train: News

Fully Overhauled and Back in Service: “Emma” Joins the HERING Fleet

Following a comprehensive overhaul, our work train locomotive “Emma” is once again operating reliably for HERING Bahndienste GmbH. At the beginning of June, the company not only took delivery of the technically refurbished locomotive, but also officially added it to its own fleet.

Fully Overhauled and Back in Service: “Emma” Joins the HERING Fleet

“Emma” had already been in service for HERING for several years under a leasing agreement. Since mid-September 2025, however, the locomotive had been in the workshop for extensive repair and maintenance work. It was thoroughly inspected, overhauled and prepared for its future assignments. Final work was still being completed on the morning of the handover before the locomotive could be returned to HERING in full working order.

With the transfer of vehicle keeper responsibility and the purchase of the locomotive, “Emma” is now fully owned by HERING Bahndienste GmbH. The combination of a major technical overhaul and permanent integration into the company’s fleet provides greater reliability and planning certainty for future transport and construction-site operations.

“Emma” is a Gravita Class 261 locomotive. The powerful work train locomotive is designed for a wide range of rail logistics tasks and can reach speeds of up to 100 km/h in high-speed mode. Further technical details can be found in the accompanying table.

After several years as a leased locomotive and an intensive workshop phase, “Emma” is now officially part of the HERING family. Fully overhauled and technically prepared for reliable operation, she is ready to cover many more kilometres in transport and construction-site service. She may also soon receive a new exterior design to match our locomotive “Hartmut”.

Read more about the HERING fleet

EMAS-Logo

HERING sustainability

At HERING, we see ourselves as pioneers in the field of sustainability. As early as 1996, we were the first construction company in Germany to obtain EMAS certification. Every three years, we publish an environmental statement documenting our goals and how we have achieved them. Actually, for the first time, we published a sustainability report with an integrated environmental statement in accordance with EMAS - a logical next step in view of our ecological and social responsibility. It documents how we deal internally and externally with the issues that are essential to our future viability.

Exhibitions / Events

Fully Overhauled and Back in Service: “Emma” Joins the HERING Fleet

Following a comprehensive overhaul, our work train locomotive “Emma” is once again operating reliably for HERING Bahndienste GmbH. At the beginning of June, the company not only took delivery of the technically refurbished locomotive, but also officially added it to its own fleet.

Fully Overhauled and Back in Service: “Emma” Joins the HERING Fleet

“Emma” had already been in service for HERING for several years under a leasing agreement. Since mid-September 2025, however, the locomotive had been in the workshop for extensive repair and maintenance work. It was thoroughly inspected, overhauled and prepared for its future assignments. Final work was still being completed on the morning of the handover before the locomotive could be returned to HERING in full working order.

With the transfer of vehicle keeper responsibility and the purchase of the locomotive, “Emma” is now fully owned by HERING Bahndienste GmbH. The combination of a major technical overhaul and permanent integration into the company’s fleet provides greater reliability and planning certainty for future transport and construction-site operations.

“Emma” is a Gravita Class 261 locomotive. The powerful work train locomotive is designed for a wide range of rail logistics tasks and can reach speeds of up to 100 km/h in high-speed mode. Further technical details can be found in the accompanying table.

After several years as a leased locomotive and an intensive workshop phase, “Emma” is now officially part of the HERING family. Fully overhauled and technically prepared for reliable operation, she is ready to cover many more kilometres in transport and construction-site service. She may also soon receive a new exterior design to match our locomotive “Hartmut”.

Read more about the HERING fleet